Dilution Chart: - For 2% v/v Correct solution strength
|Amount of Product taken
||Amount of Water taken
How to Use:
1.INSTRUMENTS AND TOOLS DISINFECTION DIRECTIONS: Clean all thermolabile surgical instrument/equipment by submersing into 2% solution for minimum 15 mins. Remove heavy soil/organic deposits from surface. Rinse thoroughly with tap water (hardness less than 400ppm). For other precleaning agents, refer to surgical instrument/ equipment manufacturers recommendations. For disinfection, submerse clean instrument/equipment in 2% solution for 5 to 60 mins according to the requirement. Rinse with sterile distilled water & allow to dry before use. Prepare a fresh solution daily or more often if the solution becomes visibly dirty or diluted.
2.DIRECTIONS FOR RO MEMBRANES DISINFECTION: Prepare 2% solution of Medntek ID 50. Circulate this solution in the RO membranes for 30-45 minutes. After 30- 45 minutes drain the solution. Flush RO membranes thoroughly with water until water becomes free from residual disinfectant as indicated by Medntek ID 50 test solution. Medntek ID 50 does not cause any harm or oxidation to polyamide layer of RO membranes.
Note: - Product should be used in accordance with label instruction.